Trackless passenger vehicle RU-10
Introduction

The RU-10 trackless vehicle is a trackless personnel transport equipment designed and manufactured for underground mines.

The RU-5 trackless vehicle is powered by diesel engine, hydro-mechanical transmission, four-wheel drive, forward driving, hydraulic steering on the front axle, large steering angle, flexible turning and small radius, suitable for roadways with 2.5m*2.5m section.

Features & Benefits:

●Adopt Yunneiguo III. low-speed and high-torque water-cooled low-pollution engine, low fuel consumption, simple and reliable operation, easy maintenance;

●The power transmission system adopts a power-shift transmission, DANA drive axle, and mine-patterned cut-resistant pneumatic tires;

●Wet multi-disc hydraulic brakes are used for service brakes; MICO Filling Valves, Brake Valves; The parking brake is braked by manual reversing valve control axle spring brake, which is safe and reliable;

●The enclosed cab is adopted, and the air conditioning is equipped with air conditioning to be safe and comfortable;

●The rear direction is used to get on the bus, which is convenient for personnel to enter and exit, and has good safety;

●The hydraulic hose and cable of the whole vehicle are covered with flame retardant sheath pipe and wax pipe to prevent fire caused by splashing of various oil products after the rupture of hydraulic hose and diesel pipe;

●The engine compartment, cab and cabin are equipped with sound insulation, noise reduction and heat insulation interiors to improve the comfort of the driver and passengers.


Product parameters

Capacity10 people
Speed0~25km/h
Maximum gradeability (loaded)25%
Maximum pulling force40 KN
Turning radius8000  mm
Steering angle±30°
Minimum ground clearance240mm
Wheelbase2805mm
Air conditioningAs standard
Overall dimensions (L×W×H)4985mm*1900mm*2050mm
Operating weight5000KG

1.jpg

2.jpg

3.jpg


Submit
Previous page:Mine Machine RU-16
Next page:Mine Machine RU-5